7207B Bearing Angular contact 7207B

Item: 7207B Bearing

Type: Single row Angular contact ball bearings

SKU: 7207BBearing

Inner Ring Diameter (bore): 35mm

Inner Ring Tolerance: 0~-15m

Outer Ring Diameter: 72mm

Outer Ring Tolerance: 0~-15m

Width: 17mm

Clearance: 1~11m

Basic Dynamic Load Rating Cr: 29,1 kN

Basic Static Load Rating Cor: 19 kN

Grease Lubrication: 11000

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

PACKAGE INCLUDES: ONE (1) NACHI BEARING 7207B