{"product_id":"skf-99463-speedi-sleeve-shaft-repair-sleeve-cr-axle-repair-seal-117-48-mm-id","title":"SKF 99463 Speedi-Sleeve Shaft Repair Sleeve CR Axle Repair Seal 117.48 mm ID","description":"\u003ch3\u003e\u003cu\u003eDescription:\u003c\/u\u003e\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cul type=\"disc\"\u003e\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSKF 99463 Wear Speedi-Sleeve Shaft Repair Sleeve 4.625\" Shaft\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eItem Specifics:\u003c\/strong\u003e\u003cbr\u003eBrand: SKF\u003cbr\u003eModel \/ Item Number: 99463\u003cbr\u003eEAN \/ UPC: 85311042888\u003cbr\u003eCategory: CR Axle Repair \/ Seal\u003cbr\u003eProduct Type: Wear Speedi-Sleeve \/ Shaft Repair Sleeve\u003cbr\u003eMaterial: Standard\u003cbr\u003eFlange Diameter: 128.6 mm\u003cbr\u003eWeight: 0.24 kg approx.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003cbr\u003eNominal Shaft Size \/ Inner Diameter: 117.48 mm \/ 4.625\"\u003cbr\u003eOuter Diameter: 117.98 mm approx.\u003cbr\u003eWidth: 31.75 mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShaft Size Range:\u003c\/strong\u003e\u003cbr\u003eMinimum Shaft Size: 117.37 mm\u003cbr\u003eMaximum Shaft Size: 117.58 mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eThis listing is for one SKF 99463 Wear Speedi-Sleeve shaft repair sleeve.\u003c\/p\u003e\n\u003cp\u003eThe SKF 99463 Speedi-Sleeve is designed to repair worn shaft surfaces where radial shaft seals run. Instead of replacing or machining the shaft, the sleeve provides a smooth sealing surface to help restore proper seal performance.\u003c\/p\u003e\n\u003cp\u003eThis sleeve is commonly used in axle repair, gearbox, transmission, pump, motor, industrial machinery, agricultural equipment, and mechanical shaft sealing applications.\u003c\/p\u003e\n\u003cp\u003eThe sleeve is designed for shafts within the specified range of 117.37 mm to 117.58 mm, with a nominal shaft size of 4.625\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMain Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·         \u003c\/span\u003eGenuine SKF 99463 Speedi-Sleeve\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·         \u003c\/span\u003eShaft repair sleeve \/ wear sleeve\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·         \u003c\/span\u003eUsed for worn seal contact surfaces\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·         \u003c\/span\u003eHelps restore sealing surface without replacing the shaft\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·         \u003c\/span\u003e4.625\" nominal shaft size\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·         \u003c\/span\u003eFits shaft range: 117.37 mm to 117.58 mm\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·         \u003c\/span\u003eSleeve dimensions: 117.48 x 117.98 x 31.75 mm\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·         \u003c\/span\u003eFlange diameter: 128.6 mm\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·         \u003c\/span\u003eSuitable for CR axle repair and seal applications\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·         \u003c\/span\u003eSuitable for industrial, agricultural, automotive, and mechanical equipment\u003c\/p\u003e\n\u003cp\u003ePlease verify all dimensions, shaft size range, part number, and application requirements before purchasing to make sure this item fits your application.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpFirst\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003eThe SKF SPEEDI-SLEEVE offers a quick and efficient solution to restore worn shafts. Faster than demetallizing or regrinding, it enhances the sealing system by creating an ideal surface for seals. In contrast to many common regrinding methods—which often yield surfaces that are difficult to seal—the outside finish of a SPEEDI-SLEEVE is optimized for this purpose.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003eWith a standard size range accommodating shafts from 12 mm to 200 mm (.472” to 8”), each sleeve is made of high-grade stainless steel, is only 0.28 mm (0.011”) thick, and features a wear-resistant surface with a finish of Ra 0.25–0.5 µm (10–20 µin). Installation requires no expensive preparation or machining—just a few minutes reduces downtime significantly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003eThese thin-walled stainless steel sleeves are a reliable fix when a crankshaft needs a renewed sealing surface. Not only do they cost less, but installation is fast and straightforward, producing a surface harder than a new shaft. The same size seal as the original will fit snugly over the newly restored surface, and every SPEEDI-SLEEVE comes with a disposable installation tool.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003eThough the installation process is simple, care and attention are required to ensure optimal results. Every kit includes an installation tool.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003e# How to Install an SKF SPEEDI-SLEEVE\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003e·\u003c\/span\u003e\u003cspan\u003e         \u003c\/span\u003e\u003cspan\u003eClean the seal counter face on the shaft and smooth out any burrs or rough spots.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003e·\u003c\/span\u003e\u003cspan\u003e         \u003c\/span\u003e\u003cspan\u003eMeasure the diameter at the location where the sleeve will be positioned, averaging readings from three different points to confirm it meets specifications. If measurements are within the recommended range, the sleeve will press-fit securely without the need for adhesive.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003e·\u003c\/span\u003e\u003cspan\u003e         \u003c\/span\u003e\u003cspan\u003eDetermine and mark the exact position for the sleeve so it covers the worn area rather than just sitting flush with the shaft end.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003e·\u003c\/span\u003e\u003cspan\u003e         \u003c\/span\u003e\u003cspan\u003eShallow grooves don’t require filling; optionally apply a light coat of non-hardening sealant inside the sleeve if desired, but remove any excess.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003e·\u003c\/span\u003e\u003cspan\u003e         \u003c\/span\u003e\u003cspan\u003eFor deep scoring, fill grooves with a powdered metal epoxy before installing the sleeve, allowing installation to wipe away any surplus. Clean off residual filler from the outside surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003e·\u003c\/span\u003e\u003cspan\u003e         \u003c\/span\u003e\u003cspan\u003ePosition the flange end first onto the shaft, then use the provided installation tool to fit the sleeve.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003e·\u003c\/span\u003e\u003cspan\u003e         \u003c\/span\u003e\u003cspan\u003eGently tap the center of the tool until the sleeve fully covers the worn section. If needed, use a similarly sized pipe or tubing with a smooth, squared-off edge. Avoid scratching the precision ground surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003e·\u003c\/span\u003e\u003cspan\u003e         \u003c\/span\u003e\u003cspan\u003eLeave the flange intact unless necessary for clearance. If removal is required, cut along the tear-off groove with metal shears, bend or twist the flange off, being careful not to damage the sleeve.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003e·\u003c\/span\u003e\u003cspan\u003e         \u003c\/span\u003e\u003cspan\u003eAfter installation, check for burrs again.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003e10. Lubricate the sleeve with the appropriate medium prior to installing the seal.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003e11. Proceed with mounting the seal.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003e# Determining the Correct Size\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003eClean the shaft thoroughly and measure the undamaged section of the seal counter face at least three times along different planes. Use the average value to select the correct SKF Sepedi-Sleeve size. If your measurement falls within the permissible product table range, the sleeve will fit tightly without needing adhesive.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpLast\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePlease verify all dimensions, shaft size range, and specifications before purchasing to make sure this item fits your application.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003e   \u003c\/strong\u003e\u003cstrong\u003e\u003cspan\u003ePACKAGE INCLUDES: ONE (1) SKF Shaft Repair Sleeve 99463\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"SKF","offers":[{"title":"Default Title","offer_id":53086423646528,"sku":null,"price":71.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0828\/3910\/9952\/files\/s-l1600_43f512e4-3920-41a4-95f5-bb9006d96a8a.webp?v=1788177963","url":"https:\/\/sunrisebearingsfl.com\/products\/skf-99463-speedi-sleeve-shaft-repair-sleeve-cr-axle-repair-seal-117-48-mm-id","provider":"Sunrise Bearings Florida","version":"1.0","type":"link"}