{"product_id":"skf-99367-speedi-sleeve-shaft-repair-sleeve-cr-axle-repair-seal-95-33mm","title":"SKF 99367 Speedi-Sleeve Shaft Repair Sleeve CR Axle Repair Seal 95.33mm","description":"\u003ch3\u003e\u003cu\u003eDescription:\u003c\/u\u003e\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cul type=\"disc\"\u003e\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSKF 99367 Speedi-Sleeve Shaft Repair Sleeve CR Axle Repair Seal 95.33 mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eItem Specifics:\u003c\/strong\u003e\u003cbr\u003eBrand: SKF\u003cbr\u003eModel \/ Item Number: 99367\u003cbr\u003eEAN: 085311042635\u003cbr\u003eCategory: CR Axle Repair \/ Seal\u003cbr\u003eProduct Type: Wear Speedi-Sleeve \/ Shaft Repair Sleeve\u003cbr\u003eApplication: Shaft Repair \/ Seal Surface Repair\u003cbr\u003eCountry of Origin: United States\u003cbr\u003eWeight: 0.184 kg approx.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003cbr\u003eShaft Diameter \/ Inner Diameter: 95.33 mm \/ 3.753\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eThis listing is for one SKF 99367 Speedi-Sleeve shaft repair sleeve.\u003c\/p\u003e\n\u003cp\u003eSKF Speedi-Sleeves are designed to repair worn shaft seal surfaces without the need to replace or re-machine the shaft. The sleeve provides a clean, smooth sealing surface, helping restore proper sealing performance when used with a compatible radial shaft seal.\u003c\/p\u003e\n\u003cp\u003eThis product is commonly used in axle repair, shaft repair, industrial equipment, automotive applications, agricultural machinery, gearboxes, pumps, and other rotating shaft assemblies.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMain Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·         \u003c\/span\u003eGenuine SKF 99367 Speedi-Sleeve\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·         \u003c\/span\u003eShaft repair sleeve\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·         \u003c\/span\u003eCR axle repair \/ seal application\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·         \u003c\/span\u003eHelps repair worn seal contact surfaces\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·         \u003c\/span\u003eProvides a smooth sealing surface for compatible shaft seals\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·         \u003c\/span\u003eShaft diameter \/ inner diameter: 95.33 mm \/ 3.753\"\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·         \u003c\/span\u003eHelps avoid shaft replacement or machining in many applications\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·         \u003c\/span\u003eSuitable for automotive, industrial, agricultural, and mechanical equipment\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·         \u003c\/span\u003eMade in United States\u003c\/p\u003e\n\u003cp\u003ePlease verify all dimensions, part number, shaft size, and application requirements before purchasing to make sure this item fits your application.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpFirst\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003eThe SKF SPEEDI-SLEEVE offers a quick and efficient solution to restore worn shafts. Faster than demetallizing or regrinding, it enhances the sealing system by creating an ideal surface for seals. In contrast to many common regrinding methods—which often yield surfaces that are difficult to seal—the outside finish of a SPEEDI-SLEEVE is optimized for this purpose.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003eWith a standard size range accommodating shafts from 12 mm to 200 mm (.472” to 8”), each sleeve is made of high-grade stainless steel, is only 0.28 mm (0.011”) thick, and features a wear-resistant surface with a finish of Ra 0.25–0.5 µm (10–20 µin). Installation requires no expensive preparation or machining—just a few minutes reduces downtime significantly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003eThese thin-walled stainless steel sleeves are a reliable fix when a crankshaft needs a renewed sealing surface. Not only do they cost less, but installation is fast and straightforward, producing a surface harder than a new shaft. The same size seal as the original will fit snugly over the newly restored surface, and every SPEEDI-SLEEVE comes with a disposable installation tool.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003eThough the installation process is simple, care and attention are required to ensure optimal results. Every kit includes an installation tool.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003e# How to Install an SKF SPEEDI-SLEEVE\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003e·\u003c\/span\u003e\u003cspan\u003e         \u003c\/span\u003e\u003cspan\u003eClean the seal counter face on the shaft and smooth out any burrs or rough spots.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003e·\u003c\/span\u003e\u003cspan\u003e         \u003c\/span\u003e\u003cspan\u003eMeasure the diameter at the location where the sleeve will be positioned, averaging readings from three different points to confirm it meets specifications. If measurements are within the recommended range, the sleeve will press-fit securely without the need for adhesive.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003e·\u003c\/span\u003e\u003cspan\u003e         \u003c\/span\u003e\u003cspan\u003eDetermine and mark the exact position for the sleeve so it covers the worn area rather than just sitting flush with the shaft end.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003e·\u003c\/span\u003e\u003cspan\u003e         \u003c\/span\u003e\u003cspan\u003eShallow grooves don’t require filling; optionally apply a light coat of non-hardening sealant inside the sleeve if desired, but remove any excess.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003e·\u003c\/span\u003e\u003cspan\u003e         \u003c\/span\u003e\u003cspan\u003eFor deep scoring, fill grooves with a powdered metal epoxy before installing the sleeve, allowing installation to wipe away any surplus. Clean off residual filler from the outside surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003e·\u003c\/span\u003e\u003cspan\u003e         \u003c\/span\u003e\u003cspan\u003ePosition the flange end first onto the shaft, then use the provided installation tool to fit the sleeve.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003e·\u003c\/span\u003e\u003cspan\u003e         \u003c\/span\u003e\u003cspan\u003eGently tap the center of the tool until the sleeve fully covers the worn section. If needed, use a similarly sized pipe or tubing with a smooth, squared-off edge. Avoid scratching the precision ground surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003e·\u003c\/span\u003e\u003cspan\u003e         \u003c\/span\u003e\u003cspan\u003eLeave the flange intact unless necessary for clearance. If removal is required, cut along the tear-off groove with metal shears, bend or twist the flange off, being careful not to damage the sleeve.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003e·\u003c\/span\u003e\u003cspan\u003e         \u003c\/span\u003e\u003cspan\u003eAfter installation, check for burrs again.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003e10. Lubricate the sleeve with the appropriate medium prior to installing the seal.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003e11. Proceed with mounting the seal.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003e# Determining the Correct Size\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpMiddle\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003eClean the shaft thoroughly and measure the undamaged section of the seal counter face at least three times along different planes. Use the average value to select the correct SKF Sepedi-Sleeve size. If your measurement falls within the permissible product table range, the sleeve will fit tightly without needing adhesive.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraphCxSpLast\"\u003e\u003cspan\u003e·         \u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePlease verify all dimensions, shaft size range, and specifications before purchasing to make sure this item fits your application.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003e   \u003c\/strong\u003e\u003cstrong\u003e\u003cspan\u003ePACKAGE INCLUDES: ONE (1) SKF Shaft Repair Sleeve 99367\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"SKF","offers":[{"title":"Default Title","offer_id":52758379102528,"sku":"SUN993657696FL","price":45.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0828\/3910\/9952\/files\/eedbbdb3-efde-4990-830e-741a69f12a27.jpg?v=1783523532","url":"https:\/\/sunrisebearingsfl.com\/products\/skf-99367-speedi-sleeve-shaft-repair-sleeve-cr-axle-repair-seal-95-33mm","provider":"Sunrise Bearings Florida","version":"1.0","type":"link"}